DUST-AID™ Platinum Light Wand makes it easy to see what you’re cleaning!
We’ve taken our most popular sensor cleaner and added an LED light within the handle so now the whole internal camera chamber is lit up. Just press the button on top of the handle and presto, instant light that travels down the stem of the Light Wand, providing illumination of the surface to be cleaned. Clean with confidence as you’ll be able to see exactly what you’re doing within the camera chamber.
The black cleaning surface is the same size as the Dust-Aid Platinum and it’s recommended to use it on sensor filters larger than 12mm x 18mm.
Items included with the Dust-Aid Platinum Light Wand are:
1 LED Light Handle
1 Dust-Aid Platinum on a clear Light Wand
2 Dust-Aid Cleaning Strips
1 User Manual
(AAA Batteries are not included.)
Safely cleans all sensor filter coatings.
The specially engineered cleaning surface used on the Light Wand makes it perfectly safe to use on any sensor filter coating. No more dragging dry brushes and their accumulated dust across the sensor filter, which could lead to scratching. Now, just press and lift a couple of times and you’re done! Dry sensor cleaning at it’s easiest and safest!
1. Safely cleans uncoated sensor filters.
We’ve tested the Platinum cleaning surface on uncoated sensor filters with no affect to the sensor filter.
2. Safely cleans ITO and Dichroic sensor filters.
We’ve tested the Platinum cleaning surface on ITO, Dichroic and weak coated sensor filters with no affect to the sensor filter coatings.
3. Safely cleans I.D.R.S.* sensor filters.
We’ve tested the Platinum cleaning surface on multiple IDRS sensor filters with no effect to the internal dust removal system housing or sensor filter alignment.
*Internal Dust Removal System
About Dust-Aid Platinum Light Wand:
One of the biggest features with the new Platinum Light Wand is its ability to have the cleaning surface repeatedly cleaned free of accumulated dust and fibers. This means that you could have a lifetime of use out of the Platinum cleaner. The Platinum cleaner comes with 6 cleaning applications and with the purchase of additional cleaning strips the life span of the Platinum could be extended indefinitely. The cleaning adhesive used to clean the Platinum cleaning surface has been developed and tested not to transfer any of the adhesives to the Platinum cleaning surface.
The Dust-Aid Platinum Light Wand cleaning surface has a micro-texture that helps to stop the formation of a vacuum seal when it’s applied to a sensor filter. When it’s depressed on a surface the micro-texture flattens out and adheres to any dust or fibers. Then, when the pressure is released the micro-texture flex’s back into place and allows air in, breaking the vacuum seal. This helps to reduce the adhesion strength and impact of the cleaning.
We have eliminated every possible contamination to the Platinum cleaning surface but there is a built-in factor that needs consideration, internal oils. These blends of cohesive materials use oils that make them soft and allow them to pick up dust and fibers. We have designed our Platinum cleaning surface not to transfer these oils to a surface when applied in a straight, up-down manor. If you were to drag the cleaning surface on its side or twist it could leave residue. This residue can be easily removed with our DUST-WAND KIT™. But, if you follow the directions and lift the cleaner straight up and down then you will have no problem.
Cleaning finger and camera oil from the Platinum cleaning surface:
If you happen to get finger or camera oil on the Platinum cleaning surface then it’s very easy to remove. Simply clean it with our DUST-CLOTH and ULTRA CLEAN liquid and then use the Cleaning Strips to remove any fibers. Test the Platinum cleaning surface before use on a piece of clean glass, like a common UV HAZE filter, to see if you removed all of the oil. Repeat as needed. It’s advised to test the Platinum cleaning surface on a piece of clean glass before use due to possible accidental skin contact, which can contaminate the Platinum cleaning surface.
Dust-Aid Platinum Light Wand in use cleaning a camera sensor filter.