Cleaning Strips for DUST-AID Platinum.
These CLEANING STRIPS are used to clean dust and fibers from DUST-AID Platinum’s cleaning surface before and after the DUST-AID Platinum sensor cleaner is used.
The CLEANING STRIPS are made with a specially formulated adhesive that will not transfer to DUST-AID Platinum sensor cleaner. Purchasing additional CLEANING STRIPS will allow the user to lengthen the life span and use of DUST-AID Platinum.
• Cleans dust from Platinum cleaning surface
• Adhesive will not transfer to the Platinum cleaning surface
• Safe and easy to use
To use the cleaning strip all you need to do is remove one white tab to expose the cleaning adhesive, place the Platinum cleaning surface flat onto the adhesive, remove Dust-Aid Platinum from the adhesive and replace the white tab backwards onto the adhesive so you will know you used that section.
NOTE: You might want to clean the sides of the cleaning surface also. To do this first clean the base with the cleaning strip and then the four exposed side walls.